Skip to content
Crescent Town Locksmith Co.Request a visit
Open 24/7(289) 806-4961Call now
Detached satin-nickel lever hardware, tubular latch and strike plate on a wooden workbench. — Lock Replacement & Upgrade, Oakridge

Change or rekey · Oakridge

Lock Replacement & Upgrade in Oakridge

Every morning the front door key needs the same little dance: push in, lift, wiggle, turn. It has been getting worse for a year, and this week it took three tries in the cold before the deadbolt finally gave.

Call now · open 24/7(289) 806-4961

Request a visit

In plain words

Moving into a home is the classic moment for this service, because you inherit whatever hardware and whatever key copies the previous owners left behind. The locksmith walks every exterior door with you and sorts the locks into three piles: sound hardware worth keeping and rekeying, worn hardware worth replacing, and doors with no deadbolt at all. Everything that stays is pinned to one new key, new locks are keyed to match, and old copies floating around town stop mattering. You leave the visit knowing exactly which key opens which door and how many of them exist.

Sound familiar?

The keys the seller handed over came in a sandwich bag: six unlabelled copies for two locks of different makes from different decades. You have no idea how many more copies exist or who is holding them.

How the visit goes

Lock Replacement & Upgrade · Oakridge

How the visit goes

Steel push bar with a latch housing, hinge plate, screws, screwdriver and tape measure on a worn bench beside an open box. — Oakridge
  1. 1

    Measuring the existing preparation

    Before any product is chosen the door is measured. Backset first, the distance from the door edge to the centre of the bore, which on most doors here is 60 or 70 millimetres. Then the cross-bore diameter, the edge-bore size, the shape of the latch faceplate, the door thickness and the handing. The strike cut-out and any glass, trim or storm door that limits where hardware can sit are noted too. These few numbers decide which locks will drop straight into the door and which would need a filler plate, an extension kit or fresh drilling, so they are written down before the catalogue is opened.

  2. 2

    Installing a keypad or smart deadbolt

    A smart lock is fitted like any deadbolt, then brought to life. The bolt and exterior keypad go on first, the interior module with its battery pack after, and the door is closed so the lock can learn where the bolt sits; a bolt that meets resistance in the strike is corrected before pairing, because a straining motor drains batteries and fails early. Codes are programmed for each person, auto-lock and sound settings are set to your liking, any phone or hub pairing is completed, and the mechanical override cylinder is tested with its key. Fresh batteries go in last.

  3. 3

    Keys counted, named and planned

    You receive the agreed number of keys, cut from the new pinning and tried in every door they should open, plus any code cards for a restricted system, which are what future copies are cut from. It is worth deciding on the spot who gets one and where the spare lives, ideally with a trusted neighbour or in a lockbox rather than in a drawer inside. If the house is now on a single key, retire every old key so none can be confused with the new one. A written list of which key does what goes in the home file.

In the van

  • Adjustable latch or bolt
  • Filler plates and thick-door extension kits
  • 75 millimetre strike and hinge screws
  • Boring jig and hole saws
  • Handleset with matching deadbolt

What affects the quote

  1. 1

    Special-order hardware

    Most standard locks come from the van. A specific style, an unusual finish or a restricted system may need ordering, which affects scheduling and is noted in the quote rather than discovered on the day.

  2. 2

    Changes to the door preparation

    Adjusting a strike mortise is minor; boring a new hole for a deadbolt, fitting a filler plate over an old mortise pocket or adapting a thick door with extension kits is quoted as its own item.

  3. 3

    Older and mortise hardware

    Servicing an original mortise case, sourcing a compatible cylinder or fitting a conversion plate on a century door involves more assessment and fitting time than a standard cylindrical replacement.

Same fees day, night or weekend.

Have it ready

Before you call · 0 / 3

(289) 806-4961

Lock Replacement & Upgrade: questions

Advice · (289) 806-4961

What does a higher grade of lock actually give me?

Grades follow ANSI/BHMA standards, with Grade 1 the highest and Grade 3 the lightest, and residential hardware carries a separate label that scores security, durability and finish. The grade reports how the lock performed on the standard's own operational, strength and security tests; a higher grade often comes with a longer bolt, a sturdier housing, pins that resist picking and a strike built to anchor into the framing, but those features are worth confirming on the specific model rather than assumed from the grade alone.

Is a smart lock a good upgrade, and what happens when the batteries run out?

For a household with many people coming and going, codes that can be added and removed are a real convenience. Behind the keypad it is still a deadbolt, so grade and strike matter as much as ever. Batteries typically last months and the lock warns you as they fade; depending on the model, a dead battery is handled with a mechanical override key or with external contacts for a temporary power source, so it is worth confirming which one your lock uses.

What happens to the old lock?

It is yours. Some people keep a sound old cylinder as a spare or move a decent deadbolt to a shed or garage door, and the locksmith can rekey it to the house key for that purpose. Worn or damaged hardware is taken away for recycling if you prefer. Either way, the old keys should be gathered up and discarded so nobody confuses them with the new set.

Lock Replacement & Upgrade near you

Toronto, Ontario

Oakridge information

Town
Oakridge, Toronto, Ontario
In business
17 years
Hours
Open 24/7 · nights, weekends and holidays, same fees
Visits
On-site assessment preferred. Request a visit or call.

What the census means at the door

58%

Older homes. About 58% of homes in Toronto were built in 1980 or earlier, according to the 2021 Census.

Period hardware on older homes deserves matching parts, not a mismatched modern set. A locksmith who works among such houses keeps finishes and styles that suit them, so a repaired or replaced lock still looks like it belongs to the door.

23%

Single-detached houses make up about 23% of homes in Toronto (2021 Census).

Townhouses share walls but usually have their own front door and often a back door or garage. Keying both alike, and checking the strike on the less-used door, is the everyday work in a neighbourhood of attached homes.

Source: Statistics Canada, 2021 Census of Population

Open Oakridge in Google Maps

Open 24/7

Request a visit

Every morning the front door key needs the same little dance: push in, lift, wiggle, turn.

Call now · open 24/7(289) 806-4961
  • On-site assessment preferred
  • Same fees day, night or weekend
  • 17 years in business